Metal roofing · Standing seam · Custom flashing
Metal roofing in Victoria, BC — standing seam.
I learned sheet metal in Austria, where a metal roof is expected to outlive the person who installed it. In Victoria I install ASC Skyline standing seam panels — concealed fasteners, hand-finished details, and flashing work that doesn’t rely on caulking to survive. This is specialty work, and it’s the work I’m trained for.
Why standing seam
- Concealed fasteners. No exposed screws to back out, rust and leak — the classic failure of cheap metal roofs.
- 40+ year service life. One metal roof instead of two or three shingle roofs.
- Wind and rain. Interlocking seams shrug off Island storms and wind-driven rain.
- Low pitch capable. Mechanically seamed profiles handle pitches shingles can’t touch.
Flashing and detail work
Panels are straight and true from the factory. What separates a 40-year roof from a 10-year headache is everything around them: valleys, gable and eave flashings, chimney saddles, vent curbs. I bend and fit that metal myself, on site, the way I was trained.

Custom sheet-metal flashing — the detail work others sub out
I hold a sheet metal ticket alongside the Red Seal in roofing, and it shows in the parts of a roof nobody photographs: chimney saddles, wall and valley flashings, custom caps and curbs, bent on site to fit your building instead of adapted from a shelf. Roofing companies sub this work out or caulk it. On my jobs it’s folded metal, soldered or seamed where it should be — and it’s a big part of why my roofs don’t leak at the details. Companies can hire this skill on its own — see For Hire. Metal also belongs on heritage homes more often than people think; see heritage & restoration.
Gutters are part of the roof system too. I install Lindab steel gutters — the Rainline half-round steel gutter and downpipe system — which handles Island rain volumes and outlasts standard aluminum gutters.
Frequently asked questions
How long does a standing seam metal roof last?
Forty years is a fair expectation, and 50-plus is common when the details are done right. The panels themselves rarely fail — metal roofs die at the flashings, fasteners and penetrations. That is exactly where European sheet-metal training pays off.
How much does a metal roof cost in Victoria compared to shingles?
As general guidance, standing seam metal runs about $10–$16 per square foot installed in the Victoria area, versus $4.50–$7.50 for asphalt shingles. Metal costs roughly double up front and lasts roughly double to triple as long, with no re-roofing tear-off in between.
Is a metal roof noisy in the rain?
Not when it is installed over a solid deck with proper underlayment, the way residential standing seam is done here. It sounds like any other roof. The noisy metal roofs people remember are thin panels on open barns.
Can metal roofing handle Vancouver Island weather?
It is one of the best choices for it. Standing seam sheds wind-driven rain, the concealed fasteners cannot back out and leak, and the finish stands up to salt air far better than asphalt granules do.
What is the difference between standing seam and corrugated metal roofing?
Standing seam hides its fasteners inside raised interlocking seams — nothing exposed to weather, back out or rust. Corrugated and exposed-fastener panels screw straight through the metal, and every screw is a future maintenance point. Exposed-fastener is cheaper and fine on barns and outbuildings; on a house you plan to keep, standing seam is the roof that doesn’t need its screws re-sealed every decade.
Request a metal roof quote
New metal roof, a conversion from cedar, or a flashing problem on the metal roof you have — describe the building and I’ll give you the straight options.
Prefer to talk? Call 250-889-5620 or email info@waterproofingsystems.ca.